How to turn on the Polludrone?
To switch on the Polludrone, push the Power switch one time as shown in the figure below. To switch off the Polludrone, push the power switch one time. ...
Tue, 17 Jul, 2018 at 2:45 PM
How to install the Polludrone on the pole?
1) Remove the Mounting plate by first unscrewing it using Hand drill / Screwdriver from the bottom side of the Polludrone. Now, remove the mounting plate.  ...
Tue, 17 Jul, 2018 at 2:39 PM
What does LED lights depict?
Power LED: At Initialization Sim Card Detection Mode Searching Network Ideal/Steady Condition Dark Blue (1 second) Fast Green Blinking Fast Cyan Bli...
Tue, 17 Jul, 2018 at 2:34 PM
What all needs to be managed by customer ?
Power, Locations, Clearance of locations, Network
Wed, 27 Jun, 2018 at 10:28 AM
Who decides the locations of installation ?
Customer. If required, customer can engage an environmental consultant. 
Wed, 27 Jun, 2018 at 10:29 AM
What is the height required for installation ?
12-15 feet from ground
Wed, 27 Jun, 2018 at 10:30 AM
Where can the hardware be installed ?
Pole or wall
Wed, 27 Jun, 2018 at 10:31 AM
What is the input power specification required ?
Raw AC is sufficient
Wed, 27 Jun, 2018 at 10:32 AM